This is our classic website.
Please click here to visit our new website.

Logo
Call Us : +91-98251 92099
home About Us product_range Quality Download rfq
productrange
Industrial Pumps
We manufacture wide range of centrifugal pumps and induction motors that suit the diverse applications. These products are available in a wide variety of sizes and dimensions depending upon the requirements and specifications. The wide range available with us are:
Centrifugal Monoblock Pump Sets
Centrifugal Monoblock Pump Sets

We manufacture and offer centrifugal monoblock pump sets that are known for their special design features. These pumps come with non-overloading power characteristics that leave no fear of overloading of motor at any operating point, thus causing no fear of burning of motor. The other features include close - coupled centrifugal pumps has better suction lift characteristics, all rotating parts are dynamically balanced results in vibration free operation - longer life of bearings - low noise, motor designed for wide voltage range @ 300 - 450 volts hence no fear of burn out due to voltage fluctuation, additional advantage of space saving - elimination of base plate - special coupling and its guard.

Usage:

  • Irrigation as well as sprinkler irrigation systems
  • Heating, circulating, water boosting, refrigeration and air conditioning
  • Used in supplying water for multistory buildings, hotels, commercial complexes etc.
  • Clean as well as slightly contaminated corrosive liquids
SPECIFICATIONS :
Rating 1.0 HP to 30.0 HP
Head Up to 88 MWC
Discharge Up to 4000 LPM
Supply system 3 Phase - 230 / 380 / 415 / 440 / 480 Volts - 50 / 60 Hz - A.C. supply
MATERIAL OF CONSTRUCTION All wetted parts of cast iron / gunmetal / s.s. 316, pump shaft of carbon steel / stainless steel and stuffing box with gland packing  / mechanical seal can be supplied against specific requirement.
End Suction Centrifugal Process Pumps
End Suction Centrifugal Process Pumps

Our range of end suction centrifugal process pumps are single stage - end suction centrifugal pumps that correspond to the German standard DIN 24256 and International standard ISO 2858 in capacity and dimensions. The single cellular spiral - foot mounted volute casing is provided with axial end suction branch and central delivery branch. Closed or semi-open radial impellers are hydraulically balanced either by providing back vanes or balancing holes to reduce the stuffing box pressure and the axial load. The impellers are also dynamically balanced, results in vibration free - low noise operation which lengthens the life of bearings.

Usage:

Our End Suction centrifugal process pumps are used for delivering all pure to slightly contaminated liquids in the temperature range from - 80°C to 250°C and under operating pressure up to 20 kg/cm². These products are also used for pumping clear or turbid water, cold or hot water, industrial applications such as heating, circulating, boosting, fire fighting, refrigeration - air conditioning, irrigation, sprinkler systems, water supply for multistoried buildings - hotels - commercial complexes, in chemical - petrochemical - process engineering for circulating liquids, delivering liquids under a system pressure and exhausting from equipment under vacuum.

SPECIFICATIONS :
Head Up to 150 MWC
Discharge Up to 300 m³/hr
MATERIAL OF CONSTRUCTION All wetted parts of cast iron / cast steel / gunmetal bronze / s.s. 316 / alloy 20, pump shaft of carbon steel / stainless steel and stuffing box with gland packing / mechanical seal can be supplied against specific requirement.
Openwell Submersible Centrifugal Monoblock Pump Sets
Openwell Submersible Centrifugal Monoblock Pump Sets

We manufacture and offer open well submersible centrifugal monoblock pump sets that require no foundation or no pump house. Pump operates under water, hence no foot valve - no priming - no suction problems - less possibility of burn-out of motor. These pump sets have a longer life owing to their raw materials that are cast iron. These pumps come with water lubricated journal & thrust bearings, dynamically balanced all rotating parts, motor designed to withstand wide voltage fluctuation.

Usage:

The different uses of our range of pumps sets are lift irrigation, drip & sprinkler irrigation, ideal for fluctuating water level wells, industrial general water supply systems, circulating systems, dewatering sumps & trenches, fountains and multistory buildings.


SPECIFICATIONS :
Rating 3.0 HP to 30.0 HP
Head Up to 88 MWC
Discharge Up to 4000 LPM
Supply System 3 phase - 380 / 415 volts - 50 / 60 Hz - A.C. supply (2 pole)
A. C. Induction Motors
A. C. Induction Motors

The different types of A.C. induction motors available with us are being largely used in various types of applications like pumps, compressors, fans, blowers, lathe machines, plastic & textile machineries, cement plants, flour mills and paper mills.


SPECIFICATIONS :
Rating 0.25 HP to 30.0 HP
Supply System 1/3 phase - 230/380/415/440/480 volts - 50/60 Hz - A.C. supply (2-4-6-8 pole)
Insulation B-Class / F-Class
Enclosure IP - 44
Mounting Horizontal foot mounted (B-3) or vertical flange mounted (B-5) or combination
Custom Design Horizontal foot mounted (B-3) or vertical flange mounted (B-5) or combination
Self-priming Centrifugal Pumps
Self Priming Centrifugal Pumps

We offer our self-priming centrifugal pumps in both close-coupled and back pull-out design. A non-return valve acts to retain sufficient liquid in the casing to assure fast & reliable priming, re-priming and air-handling capabilities. The pump comes with the facility of re-priming automatically once initially primed the pump. Impellers are semi-open type designed for maximum efficiency and re-priming capabilities to achieve better suction lift characteristics. All rotating parts are dynamically balanced results in vibration free operation – longer life of bearings – low noise. In close-coupled design, motor designed for wide voltage range hence no fear of burn out due to voltage fluctuation. In back pull-out design, the entire sub-assembly can be removed without disturbing the pipe work and the driver. There is no need for any realignment after reassembling

Usage:

Our range of self-priming centrifugal pumps are used for general irrigation and sprinkler irrigation systems, for domestic applications such as water / liquid transfer, dewatering, livestock watering, cleaning bilges and deck on marine side, swimming pool filteration, for industrial applications such as effluent treatment plant, lifting polluted water, sewage water, air conditioning and many more.

For close-coupled self-priming pump

SPECIFICATIONS :
Rating 0.5 HP to 7.5 HP
Head Up to 25 MWC
Discharge Up to 22 LPS
Reprime Capabilities Up to 7.5 MWC
Temperature Up to 70° C MAXIMUM
Supply System 3 Phase – 230 / 380 / 415 / 440 / 480 Volts – 50 / 60 Hz – A.C. supply
MATERIAL OF CONSTRUCTION All wetted parts of cast iron / gunmetal / s.s. 316, pump shaft of carbon steel / stainless steel and stuffing box with gland packing  / mechanical seal can be supplied against specific requirement.

For back pull-out self-priming pump

SPECIFICATIONS :
Head Up to 34 MWC
Discharge Up to 67 LPS
MATERIAL OF CONSTRUCTION All wetted parts of cast iron / gunmetal / s.s. 316, pump shaft of carbon steel / stainless steel and stuffing box with gland packing  / mechanical seal can be supplied against specific requirement.
In-line Pumps
In Line Pumps

The in-line pumps available with us are known and appreciated for their electrically driven design. These pumps are derived from standard foot mounted pumps that are easy to dismantle and are also occupy very less space. These pumps can also operate with shaft in horizontal, vertical, inclined position. Our range of pumps can easily operate at water temperature up to 90° C.

Usage:

The different areas where our in-line pumps are used are central heating, air-conditioning & refrigeration installations, water supply and circulation for industrial and commercial uses, water boosting for industrial and sprinkler systems and irrigation and dewatering systems.

SPECIFICATIONS :
The supply system in which our in-line pumps are offered by us are 3 Phase – 230 / 380 / 415 / 440 / 480 Volts - 50 / 60 Hz - A.C. Supply.
MATERIAL OF CONSTRUCTION All wetted parts of cast iron / gunmetal / s.s. 316, pump shaft of carbon steel / stainless steel and stuffing box with gland packing  / mechanical seal can be supplied against specific requirement.

Home | About Us | Product Range | Quality | Downlaod | Contact Us

©2009 ajayengineers.com